Ashrae 55 thermal comfort-standard. Esta norma permite informarse de los estandares de confort termico y las condiciones necesarias. ANSI/ASHRAE Standard Thermal Environmental Conditions for Human Occupancy is an .. 5 December ^ Jump up to: ASHRAE Standard 55 ( ). A better way to predict comfort: the new ASHRAE standard Permalink Authors. Olesen.
|Published (Last):||3 March 2012|
|PDF File Size:||1.56 Mb|
|ePub File Size:||12.65 Mb|
|Price:||Free* [*Free Regsitration Required]|
It was first published inand since has been updated every three to six years. The most recent version of the standard was published in The body of the standard consists of a foreword describing changes made in the current versioneight sections and two normative appendices:.
After the body of the standard there are 11 informative appendices. These are not part of the standard, but provide additional information about terms and methods described within the standard, as well as a bibliography, and a description of the addenda incorporated from the previous version in the current version. As described within the standard: The standard addresses the four primary environmental factors temperaturethermal radiationhumidityand air speed and two personal factors activity and clothing that affect thermal comfort.
Adaptive model is a model that relates indoor design temperatures or acceptable temperature ranges to outdoor meteorological or climatological parameters.
Thermal comfort is the condition of mind standaard expresses satisfaction with the thermal environment and is assessed by 552004 evaluation. A occupant-controlled naturally conditioned space is where the thermal conditions of the space are primarily regulated by occupant-controlled openings.
Comfort zone refers to the standarrd of air temperature, mean radiant temperature trand humidity that are predicted to be an acceptable thermal environment at particular values of air speed, metabolic rate, and clothing insulation I cl . Clothing insulation is the resistance to sensible heat transfer provided by a clothing ensemble expressed in units of clo, which is a unit to quantify the insulation provided by garments and clothing ensembles.
Metabolic rate is the rate of sahrae of chemical energy into heat and mechanical work by metabolic activities of an individual, per unit of skin surface are expressed in units of met equal to Exceedance hour is the number of occupied hours within a defined time period in which the environmental conditions in an occupied space are outside the comfort zone. The graphic method utilizes an overlay on a psychrometric chart to indicate the operative temperatures and humidity at which thermal comfort is achieved in the winter 1.
If these requirements are met and the environmental conditions inside the building fall within the indicated ranges, then compliance is achieved. For humidity ratios above 0. Compliance is achieved if the conditions provide thermal neutrality, measured as falling between The section sets provisions for increasing the upper air temperature limit at elevated air speeds above 0.
The methodology is based on the SET Standard Ashras Temperature model, which provides a way to assign an effective temperature at a standard metabolic rate, and clothing insulation values to compare thermal sensations experienced at a range of thermal conditions. Stabdard temperature asymmetry between ceiling and floor, and shandard and walls must be limited to reduce discomfort. To reduce draft risk at temperatures below When occupants do not have control over the cyclical variation or drifts in indoor environmental conditions, the conditions within this section must be met.
ASHRAE 55 – Wikipedia
Operative temperatures may not fluctuate more than 1. For this model the standard provides a graph of acceptable indoor temperature limits at prevailing wshrae outdoor temperatures a mean of the daily mean outdoor temperatures of the previous 7—30 days. An accompanying table lists provisions for higher operative temperatures at air speeds above 0. The graph is valid for prevailing mean temperatures between 10— This section of the standard is applicable for the design of buildings. All of the building systems must be designed to maintain the occupied spaces at the indoor conditions specified by one of the described evaluation methods at design conditions.
The systems must be able to maintain these conditions within the expected range of indoor and outdoor operating conditions. To demonstrate compliance the following must be documented, where applicable. Sample documentation is provided in Informative Appendix J. Generally, the evaluation of comfort in existing buildings can be performed from two perspectives: Indoor thermal comfort can be determined from the responses of the occupant survey.
The survey shall be distributed to the entire occupancy or representative part of the occupancy. If that number is between 20 and 45, the minimum number of responses is When the number is under 20, at least 16 must reply for the survey to make the survey representative.
For satisfaction surveys, the thermal satisfaction scale shall end with choices: As for point-in-time surveys, the survey should be solicited during the time of occupancy, and the satisfaction scale ought to be continuous.
There should be at least seven points on the scale ending with “very acceptable” and “very unacceptable. For mechanically conditioned spaces, the PMV-based comfort zone has asgrae be determined, which includes ashraf and recording the metabolic activity and clothing insulation. The comfort zone boundaries must be adjusted to the air movements, and the zone conditions should be adjusted to avoid local thermal discomfort.
For occupant-controlled naturally conditioned space, the adaptive model shall be used to determine the thermal comfort boundaries. For such spaces, the indoor and outdoor air temperature and mean radiant temperature and the air speed need to be measured.
The measurement locations should be where the occupants are expected to spend stzndard in. If there are multiple such locations, the measurement can be performed at 55-20004 representative location. For seating occupants, the air temperature and air speed measurements shall be taken at heights of 0.
The heights need to be adjusted for standing persons. The standard suggests that the time of measurements should last two or more hours long, and it should also be a representative time of the year for this specific building. Measuring time step should be no more than five minutes for air temperature, mean radiant temperature, and humidity, and no more than three ashraee for the air speed. In order to achieve acceptable results, the standard also suggests the minimum equipment accuracy based the current industry standard.
When extracting environmental data from the Building Administration System, one should evaluate the location, height, and time step of the sensors based on the previous suggestion. To evaluate the probability of satisfaction from satisfaction surveys, the standard suggests dividing the number of the votes falling between “just satisfied” and “very satisfied” by the total number of votes in that questions.
The answers of open-ended questions from asheae dissatisfied” occupants should be documented for later analysis. One has to stabdard in mind that the results from point-in-time surveys are only effective during the time when the surveys were solicited. The measured results should be evaluated against the adjusted comfort zone for the specific building. There are two cases when evaluating thermal comfort: For a mechanically conditioned space at an instance in time, the PMV and SET model shall be used to establish the comfort zone, and the local thermal discomfort shall be evaluated against the limit posed this standard as well.
For occupant-controlled naturally conditioned spaces, the measured results shall be check with the comfort zone established by adaptive model.
To evaluate the thermal comfort over a period of 55-22004 in a mechanically conditioned space, the exceedance hours are the sum of all the hours when the absolute value of PMV is greater than 0. For an occupant-controlled naturally conditioned space, the exceedance hours are the sum of hours when the operative temperature falls outside of the lower and upper boundaries of the comfort zone. Metabolic rate is the rate of transformation of chemical energy into heat and mechanical work by metabolic activities of an individual.
It is defined as per unit of skin surface area which equals to This is the energy produced from a unit skin surface area of an average person seated at rest. These values are valid for an average adult with surface skin area of 1. The standard reminds the users that they should use their own judgment to match the activities being considered to the comparable activities in the table.
Except sedentary activities, metabolic rate for all other activities is likely to have range of variation. When the duration of an activity is equal or less than one hour, one can use a time-weighted metabolic rate. As metabolic rates increase over 1. Clothing insulation refers to the heat transfer of the entire body, which includes the uncovered parts, such as hands and heads. There is a variety of means to determine the insulation provided by clothing.
Accurate data from the measurement using thermal manikins is acceptable. When such measurement is not feasible, this standard provides four methods to determine the clothing insulation.
It is also specified that the methods provided by this standard are no longer valid when the clothing insulation exceed 1. And it is also not valid when occupants wear clothing that is highly impermeable to moisture transport.
First, one can estimate the clothing insulation from the table provided in section five. If the clothing ensemble in question reasonably matches the clothing ensemble in the table, the indicated value can be used.
The second method is to add or subtract individual garment clo value to achieve the clothing ensemble in question. This table can be used together stamdard the previous one, so that one can add or subtract the clothing ensemble from the clo value of each garment.
The third method is to add all the clo value of each garment to match the clothing ensemble in question.
This method is based on the concept that when occupants choose their clothing according to their environment, the outdoor environment is more influential than the indoor one.
There is a figure in the section five of the standard which predicts the representative clothing insulation of the occupants as a function of the average outdoor air temperature at The function line has four segments: There is a function to determine the representative clothing insulation at each segment. One can also take into account the posture of the occupants. So far, all the clothing insulation value can be used when the occupant is standing.
When occupant is sitting, one has to realize the insulation effect of the chair, and the decrease of insulation due to compression of the air in the clothing. If the occupant is moving, it also affects the insulation value of clothing.
Interpretations for Standard 55-2004
In general, body motion decreases the clothing insulation by pumping air through clothing. Thus, it only provides an approximation of the clothing insulation value of a moving person. This approximation is an equation that relates the clothing ashae with the metabolic rate.
And this equation is only valid when the metabolic rate is between 1. Considering that a sleeping person or one in reclining posture will be 55-20004 with sufficient insulation with the bedding material, and he or she is also free to adjust, it is impossible to determine the clothing insulation effect for these occupants unless they are immobile.
In the first asurae, different individuals wear different clothing due to factors that are not related to thermal conditions, and the second form is opposite. For the first, it is not correct to use the average clothing insulation value to determine the desired thermal conditions for all occupants.
It was revised in,and In the standard was updated with more extensive information on measurement protocols and an expanded definitions section. In the standard underwent significant changes with the addition of two thermal comfort models: In the standard included the following changes.